Paper published in peer-reviewed international journals
25. Samad, A., and Basak, S. 2025. Fracture identification during the incremental forming process using a calibrated damage model with optimized sample geometries. Journal of Materials Engineering and Performance (accepted). (SCIE)
24. Basak, S. and Panda, S.K., 2025. Numerical and experimental analyses on failure limits of DP600 steel sheets during two-stage forming experiments. The International Journal of Advanced Manufacturing Technology (accepted). (SCIE)
23. Samad, A., Thakur, A.K., Basak, S. and Pal, K. 2025. Machine Learning Enabled Estimation of Formability for Anisotropic Sheet Metals. Metals and Materials International (accepted). (SCI)
22. Samad, A., Thakur, A.K. and Basak, S., 2025. Formability Prediction of Anisotropic Thin Sheets Using Machine Learning Framework: Influence of Pre-Strain and Temperature. Journal of Materials Engineering and Performance, pp.1-23. (SCIE)
21. Basak, S. and Panda, S.K., 2023. Use of uncoupled ductile damage models for fracture forming limit prediction during two-stage forming of aluminum sheet material. Journal of Manufacturing Processes, 97, pp.185-199. (SCI)
20. Bandyopadhyay, K., Basak, S., Panda, S.K., Saha, P. and Zhou, N., 2023. Application of non-associated flow rule for prediction of nonuniform material flow during deep drawing of tailor welded blanks. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 237(4), pp.618-629. (SCI)
19. Basak, S., Kim, C., Jeong, W., Jung, Y.I. and, Lee, M.G., 2022. Investigation on sheared edge in trimming of advanced high strength steels and aluminum alloy sheets using ductile fracture modeling and simulations. International Journal of Mechanical Sciences, 219, p.107109. (SCI)
18. Basak, S., Kim, C., Jeong, W., Jung, Y.I. and, Lee, M.G., 2022, Analyses of shearing mechanism during shear-cutting of 980 MPa dual-phase steel sheets using ductile fracture modeling and simulation. International Journal of Material Forming, 15(1), pp.1-21. (SCI)
17. Chen, S.F., Bandyopadhyay, K., Basak, S., Hwang, B., Shim, J.H., Lee, J. and Lee, M.G., 2021. Predictive integrated numerical approach for modeling spatio-temporal microstructure evolutions and grain size dependent phase transformations in steels. International Journal of Plasticity, 139, p.102952. (SCI)
16. Bandyopadhyay, K., Basak, S., Choi, H., Panda, S.K. and Lee, M.G., 2021. Influence of Evolution in Anisotropy During Strain Path Change on Failure Limits of Sheet Metals. Metals and Materials International, pp.1-13. (SCI)
15. Basak, S., Panda, S.K. and, Lee, M.G. Formability and fracture in deep drawing sheet metals: Extended studies for pre-strained anisotropic thin sheets. International Journal of Mechanical Sciences, 2020, 170, 105346. (SCI)
14. Basak, S. and Panda, S.K., Failure strains of anisotropic thin sheet metals: experimental evaluation and theoretical prediction. International Journal of Mechanical Sciences, 2019, 151, pp.356-374. (SCI)
13. Basak, S. and Panda, S.K. Necking and fracture limit analyses of different pre-strained sheet materials in polar effective plastic strain locus using Yld2000-2d yield model. Journal of Materials Processing Technology, 2019, 267, pp.289-307. (SCIE)
12. Basak, S., Prasad, K.S., Sidpara, A.M. and Panda, S.K. Single point incremental forming of AA6061 thin sheet: calibration of ductile fracture models incorporating anisotropy and post forming analyses. International Journal of Material Forming, 2019, 12(4), pp.623-642. (SCIE)
11. Basak, S., Katiyar, B.S., Orozco-Gonzalez, P., Baltazar-Hernandez, V.H., Arora, K.S. and Panda, S.K. Microstructure, forming limit diagram, and strain distribution of pre-strained DP-IF steel tailor–welded blank for auto body application. The International Journal of Advanced Manufacturing Technology, 2019, pp.1-19. (SCIE)
10. Basak, S., Prasad, K.S., Mehto, A., Bagchi, J., Ganesh, Y.S., Mohanty, S., Sidpara, A.M. and Panda, S.K. Parameter optimization and texture evolution in single point incremental sheet forming process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2019, p.0954405419846001. (SCI)
9. Bandyopadhyay, K., Basak, S., Prasad, K.S., Lee, M.G., Panda, S.K. and Lee, J. Improved formability prediction by modeling evolution of anisotropy of steel sheets. International Journal of Solids and Structures, 2019, 156, pp.263-280. (SCI)
8. Basak, S., Panda, S.K. Implementation of Yld96 anisotropy plasticity theory for estimation of polar effective plastic strain based failure limit of pre-strained thin steels. Thin-Walled Structures. 2018, 126, 26-37. (SCI)
7. Singh, A., Basak, S., Roy, G.G., Jha, M.N., Mascarenhas, M. and Panda, S.K. Prediction of earing defect and deep drawing behavior of commercially pure titanium sheets using CPB06 anisotropy yield theory. Journal of Manufacturing Processes, 2018, 33, pp.256-267. (SCIE)
6. Guzman-Aguilera, J.J., Martinez-Gonzalez, C.J., Baltazar-Hernandez, V.H., Basak, S., Panda, S.K., Razmpoosh, M.H., Gerlich, A., Zhou, Y. Influence of SC-HAZ microstructure on the mechanical behavior of Si-TRIP steel welds., Mater. Sci. Eng. A, 2018, 718, 216–227. (SCI)
5. Panicker, S.S., Prasad, K.S., Basak, S. and Panda, S.K. Constitutive Behavior and Deep Drawability of Three Aluminum Alloys Under Different Temperatures and Deformation Speeds. Journal of Materials Engineering and Performance, 2017, 26(8), pp.3954-3969. (SCIE)
4. Kesharwani, R.K., Basak, S., Panda, S.K. and Pal, S.K. Improvement in limiting drawing ratio of aluminum tailored friction stir welded blanks using modified conical tractrix die. Journal of Manufacturing Processes,
3. Dhara, S., Basak, S., Panda, S.K., Hazra, S., Shollock, B. and Dashwood, R. Formability analysis of pre-strained AA5754-O sheet metal using Yld96 plasticity theory: Role of amount and direction of uni-axial pre-strain. Journal of Manufacturing Processes, 2016, 24, pp.270-282. (SCI)
2. Basak, S., Panda, S.K. and Zhou, Y.N. Formability assessment of prestrained automotive grade steel sheets using stress based and polar effective plastic strain-forming limit diagram. Journal of Engineering Materials and Technology, 2015, 137(4), p.041006. (SCI)
1. Bandyopadhyay, K., Basak, S., Panda, S.K. and Saha, P. Use of stress based forming limit diagram to predict formability in two-stage forming of tailor welded blanks. Materials & Design, 2015, 67, pp.558-570. (SCIE)
Patents
• Vinith S S., Sarthak V., Basak S., “Concise instrument for three-dimensional cartesian coordinate point measurement.” Design registration submitted, under revision. Design Application Number: 429360-001.
• Vinith S S., Sarthak V., Basak S., “Concise and mesoscale precision instrument for 3D cartesian coordinate measurement.” Patent filing submitted, under revision. Patent Filing Ref. Number: 202511049960.
International conferences
17. Samad, A. and Basak, S., 2025. Formability analyses during multi-stage SPIF process using optimized ductile fracture locus. Materials Research Proceedings, 54. Presented in ESAFORM Conference on Material Forming, ESAFORM2025, 6-9th May, 2025 in Paestum, Italy.
16. Kumar, A., Samad, A. and Basak, S., 2024, December: A Novel Hybrid Machine Learning and Finite Element Approach to Reduce the Earing Defect During Square Deep Drawing. The 13th International Conference on Precision, Micro, Meso and Nano Engineering, COPEN13, December 13 - 15, 2024, NIT Calicut.
15. Sarthak V., Vinith S S., Basak S., 2024. “Effect of toolpath designs on the formability during multistage single point incremental square hole flanging process.” The 13th International Conference on Precision, Micro, Meso and Nano Engineering, COPEN13, December 13 - 15, 2024, NIT Calicut.
14. Panicker, S.S. and Basak, S., 2024. Effect of Material Modeling on Prediction of Isothermal Formability of AA6082-O Sheet at Elevated Temperature. Applied Mechanics and Materials, 925, pp.51-57. (Presented in 3rd International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2023), BITS Pilani, Dubai Campus, Dubai, UAE, 20-23rd November, 2023.)
13. Samad, A., and Basak, S., 2023, December. Fracture Identification during Incremental Forming Process using Calibrated Damage Models with Optimized Sample Geometries. 9th International and 30th All India Manufacturing Technology, Design and Research Conference (AIMTDR2023), IIT (BHU), Varanasi, India, 8-10th December, 2023.
12. Kumar, A., and Basak, S.,2023, December. Prediction of Cup Height using Non-Associated Flow Rule during Square Deep Drawing of Anisotropic Sheets.9th International and 30th All India Manufacturing Technology, Design and Research Conference (AIMTDR2023), IIT (BHU), Varanasi, India, 8-10th December, 2023.
11. Kumar, A. and Basak, S., 2022, October. Experimental and Numerical Analyses of Uniaxial Tensile Test of Automotive Grade Anisotropic Sheets. In International Conference on Advances in Materials Processing: Challenges and Opportunities (AMPCO) (pp. 153-158). Singapore: Springer Nature Singapore.
10. Basak, S., Bandyopadhyay, K., Panda and S. K., Prediction of deep-drawability of tailor welded blanks based on non-associated flow rule approach. All India Manufacturing Technology, Design and Research Conference (AIMTDR2021), PSG College of Technology, India 9-11th December, 2021.
9. Basak, S., Kim, C. and Lee, M.G. Numerical Analyses of Shearing Mechanism during Trimming of sheet Metals. 16th Asia-Pacific Conference on Fracture and Strength 2020 (APCFS2020), Jeju, South Korea, 3-7th Nov, 2020.
8. Bandyopadhyay, K., Basak, S., and Lee, M.G. Influence of anisotropy evolution on strain path independent failure limits. International Deep Drawing Research Group (IDDRG2020), Busan, South Korea, 25-29th Oct, 2020.
7. Choi H., Kim CY., Basak, S., and Lee M. G. Ductile fracture behavior of pre-strained ferritic steel sheets: DIC analysis and modeling with distortional hardening law, International Conference on Plasticity, Damage & Fracture (ICPDF2020), Barceló Maya Grand Resort, Rivera Maya, Mexico, 3rd-9th January, 2020.
6. Basak, S., Lee M. G, Panda S. K. Prediction of the fracture strains of pre-strained dual phase steel sheets, Numerical Methods in Industrial Forming Processes (NUMIFORM2019), Portsmouth, New Hampshire, USA, 23-27th June, 2019.
5. Basak, S., Lee, M.G. and Panda, S.K. Analyses of failure strains in pre-strained anisotropic sheet metal. Korea Society of Automotive Engineers Spring Conference (KSAE2019), May 2019, Jeju, South Korea.
4. Basak, S., and Panda, S.K. 2017. “Implementation of YLD-96 Plasticity Theory in Formability Analysis of Bi-axial Pre-strained Steel Sheets”. In 11th International Symposium on Plasticity and Impact Mechanics, (IMPLAST 2016), at IIT Delhi, Delhi, 11-14th December 2016.
3. Bandyopadhyay, K., Basak, S., Choi, H. J., Panda S. K., & Lee M. G., Effect of anisotropic yield function evolution on estimation of forming limit diagram, International Deep Drawing Research Group (IDDRG2017), Munich, Germany, 2-6th July, 2017.
2. Basak, S., and Panda, S.K. 2016 "Application of Barlat Yld-96 Yield Criterion for Predicting Formability of Pre-Strained Dual Phase Steel Sheets." In ASME’s 11th International Manufacturing Science and Engineering Conference (MSEC2016), at Virginia Tech., Blacksburg, Virginia, USA. 27th June- 1st July 2016.
1. Basak, S., Bandyopadhyay, K., Panda, S. K., & Saha, P., Prediction of formability of bi-axial pre-strained dual phase steel sheets using stress based forming limit diagram. All India Manufacturing Technology, Design and Research Conference (AIMTDR), 575-1, IIT Guwahati, Guwahati, India 12-14th December, 2014.
Book Chapter
Basak, S., Bandyopadhyay, K., Panda, S. K., and Saha, P., Prediction of formability of bi-axial pre-strained dual phase steel sheets using stress-based forming limit diagram. In Advances in Material Forming and Joining, Springer, India, pp. 167-192, 2015.